Programme
Tue 2025-09-02
18:00 – 21:00 Registration and welcome buffet
Microcity Main Hall
Wed 2025-09-03
08:20 – 08:30 Welcome
Room A – Auditorium
Wed 08:20 – 08:30
08:30 – 09:45 Keynote session 3
Healing damage in Almazium: a new high-strength aluminium alloy produced by additive manufacturing
Aude SimarRoom A – Auditorium
After her Mechanical Engineering Degree at the University catholique de Louvain (UCLouvain) in Belgium in 2002, Aude Simar obtained a Ph.D. from the same university in 2006 with research related to friction stir welding in aluminum alloys. She was a post-doctoral fellow for 1.5 years at the University of California at Berkeley (UCB) in the USA. After returning to UCLouvain, she joined the academic staff of the university in 2013. In 2016, she received an ERC starting Grant (ALUFIX) with the aim to mitigate and heal damage in aluminum alloys. Pr. Simar is known for her contributions to the understanding of damage of metallic materials, additive manufacturing and friction stir based processed for aluminum alloys and dissimilar welding. She supervised about 50 researchers working on these various topics. She is member of the editorial board of “Materials Characterization” and “International Materials Review”. Since 2024, she is the president of the Institute of Mechanics, Materials and Civil Engineering.
Wed 08:30 – 09:05
Alloy design
Design of alloys for additive manufacturing via solidification-induced microstructure heterogeneities
Christian HaaseRoom A – Auditorium
Christian Haase is a full professor at the Technische Universität Berlin (TUB). He holds the chair of Materials for Additive Manufacturing and is also the scientific director of the Centre for 3D Technologies at TUB. His current research activities focus on understanding the fundamental mechanisms that govern microstructure formation in additively manufactured alloys, alloy design for additive manufacturing and the development of design strategies combining experiments, integrated computational materials engineering and machine learning. Christian Haase studied mechanical and materials engineering at the Otto-von-Guericke University Magdeburg (Germany) and Monash University (Australia). He then obtained his Ph.D. (completed in 2016) in the field of physical metallurgy and metal physics at RWTH Aachen University. From 2016 to 2024, he headed the research areas Integrated Computational Materials Engineering and Materials for Additive Manufacturing at the Steel Institute of RWTH Aachen University.
Wed 09:05 – 09:40
Alloy design
10:45 – 11:05 Coffee Break
11:05 – 12:25 3.2 – Multi-materials I / Al alloys I
Multi-Material Additive Manufacturing of Dual-Steel Complex Internal Geometries
Lucy FarquharRoom A – Auditorium
Wed 11:05 – 11:25
Multi-materials I
Eric Aimé Jägle
Hybrid additive manufacturing of Ti-Cu structures, combining powders with metallic foils
Amir Mohammad JamiliRoom A – Auditorium
Wed 11:25 – 11:45
Multi-materials I
Roland Logé
Fe-Cu multi-materials manufactured via laser directed energy deposition by in-situ alloying
Maurizio VedaniRoom A – Auditorium
Wed 11:45 – 12:05
Multi-materials I
Sisa Pityana
Expanding the Possibilities of Multi-Metal Additive Manufacturing with Molten Metal Jetting
Negar GilaniRoom A – Auditorium
Wed 12:05 – 12:25
Multi-materials I
Richard Hague
Alloy Design for Improved Precipitation Hardening in Additively Manufactured Al-Alloys
Bharat MehtaRoom B – MC B1 303
Wed 11:05 – 11:25
Aluminium alloys I
Andreas Markström
Dynamic behavior of the 7075 high strength aluminum alloy produced by LPBF
Julien Rosar LonginRoom B – MC B1 303
Wed 11:25 – 11:45
Aluminium alloys I
Aude Simar
Processing optimization in directed energy deposition of aluminium alloy powders
Ananthakrishna SajithkumarRoom B – MC B1 303
Wed 11:45 – 12:05
Aluminium alloys I
Mark Easton
Al-8Fe-4Ce alloy by laser powder bed fusion
Nicolò ArcieriRoom B – MC B1 303
Wed 12:05 – 12:25
Aluminium alloys I
Diego Manfredi
12:25 – 13:30 Lunch Break
Microcity Main Hall
13:30 – 15:10 3.3 – Multi-materials II / Beamshaping + LHT
Phase Formation and Texture Evolution of 316L-CuCrZr Multi-Material Structures
Antonios BaganisRoom A – Auditorium
Wed 13:30 – 13:50
Multi-materials II
Christian Leinenbach
Insights on Interface Features in 3D-Printed Multi-materials
Silvia MarolaRoom A – Auditorium
Wed 13:50 – 14:10
Multi-materials II
Maurizio Vedani
Multimaterial Laser Powder Bed Fusion of Ti6Al4V and NiTi Components
Hadi MoutabLalehRoom A – Auditorium
Wed 14:10 – 14:30
Multi-materials II
Mehrshad Mehrpouya
Characterization of microstructure and mechanical properties of L-DED processed Ni-Al alloy with different Ni/Al ratios for design of Ni-Al functionally graded materials
Haeju JoRoom A – Auditorium
Wed 14:30 – 14:50
Multi-materials II
Wookjin Lee
High-fidelity Modeling of Multi-Material Additive Manufacturing: Process, Microstructure, and Property
Wentao YanRoom A – Auditorium
Wed 14:50 – 15:10
Multi-materials II
Development of in-situ laser preheating for non-weldable Ni-based superalloys manufactured by L-PBF process
Matthieu AssainteRoom B – MC B1 303
Wed 13:30 – 13:50
Beamshaping + Laser heat treatment
Nicolas Leriche
Enhanced As-Built Microstructure and Residual Stress Characteristics of IN718 Processed via Laser-Based Powder Bed Fusion with Laser Beam Shaping
Narges MirzabeigiRoom B – MC B1 303
Wed 13:50 – 14:10
Beamshaping + Laser heat treatment
Katrin Wudy
In-situ microstructure engineering in stainless steel 17-4 PH fabricated by laser powder bed fusion
Zhihao PanRoom B – MC B1 303
Wed 14:10 – 14:30
Beamshaping + Laser heat treatment
Venkata Karthik Nadimpalli
Laser Beam Shaping and Laser Beam Oscillations – Local and Temporal Modulation of the Energy Input as the Solution for Hard-to-weld Materials?
Thomas StollRoom B – MC B1 303
Wed 14:30 – 14:50
Beamshaping + Laser heat treatment
Katrin Wudy
Using beam shaping for microstructure tailoring in laser-based powder bed fusion of metals
Jonas GrünewaldRoom B – MC B1 303
Wed 14:50 – 15:10
Beamshaping + Laser heat treatment
Katrin Wudy
15:10 – 15:30 Coffee Break
16:50 – 17:00 Break
17:00 – 18:00 1 min Poster Presentation
Microstructure and mechanical properties of aluminum lattice structures fabricated via 3D printing-based investment casting
Juyoung LeeRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Wookjin Lee
Architected metal matrix composites from Zr-modified Al7075 and zinc via LPBF and HIP for extrinsic healing applications
Mohammed FaragRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Aude Simar
Microstructure and mechanical properties of 316L steel-Inconel 625 gradient materials manufactured by laser powder bed fusion
Hubert PasiowiecRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Beata Dubiel
Multi-material additive manufacturing of 316L and 17-4 PH steels: Interface comparison between two distinct technologies
Sophie BadinRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Marion Coffigniez
Thermodynamics-based modification of the Koistinen-Marburger model for martensitic transformation in metal additive manufacturing
Harshita SharmaRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Ananthanarayanan Durga
The effects of hydrogen on the tensile properties of additively manufactured Hastelloy-X for hot parts
Naoma AbeRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Masaki Taneike
Additive manufacturing of in-situ particle reinforced ODS/NDS alloys utilizing the process atmosphere
Christian FelberRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Eric Aimé Jägle
LPBF process windows mapping for shape memory and superelastic NiTi alloys: A comparative study
Ignatius Andre SetiawanRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Mehrshad Mehrpouya
Effect of microstructure on the shape memory effect of Fe-17Mn-10Cr-4Ni (wt.%) alloy fabricated by L-DED
Taeyoon KimRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Wookjin Lee
Understanding Precipitation Kinetics in an Additively Manufactured Hot Work Tool Steel
Satya Chaitanya VaddamanuRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Eduard Hryha
Development of Metal Matrix Composites based on Al2618+ for Laser Powder Bed Fusion Additive Manufacturing
Kostas GeorgiouRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Theodora Kyratsi
Effect of Hf and Ce Additions on Microstructure and Mechanical Properties of Direct Energy Deposited High Manganese Steel
Minki KimRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Wookjin Lee
Effects of Process Parameters on Microsctructure and Superelasticity of L-DED processed Fe-36Mn-9Al-7Ni Shape Memory Alloy
Jiyoung ParkRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Wookjin Lee
Reduction of anisotropy in Ti-6Al-4V WAAM deposits by dual wire TIG using vibrations
Arthur RaquinRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Pascal Paillard
Influence of carbon addition on microstructure and shape memory properties of Co-Cr-Fe-Mn high entropy alloy produced by L-DED
Minsu ParkRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Wookjin Lee
Post-heat treatment effect on the microstructure and mechanical properties of directed energy deposited IN738LC alloy
Hoseong KangRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Jung Gi Kim
Thermohydraulic modelling of the WLAM process – Application to the prediction of grain structure development on Inconel alloys
Zichen KongRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Michel Bellet
Thin-Wire Multi-Material Electron Beam Additive Manufacturing
Paulo Davi Borges EstevesRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Christian Leinenbach
Tailoring L-PBF process parameters to investigate surface roughness effects on AlSi10Mg waveguides
Olivier PonceletRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Aude Simar
“Welding” the un-weldable: insights into PBF-LB processing of CM247LC
Ahmed Fardan Jabir HussainRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Eduard Hryha
Investigation of Particle-Melt Pool Impact Dynamics and In-Flight Laser-Powder Stream Coupling in Laser Directed Energy Deposition
Akash AggarwalRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Christian Leinenbach
Characterization of additively manufactured parts by high-flux MetalJet X-ray sources
Tatiana MishurovaRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Manuela Klaus
In-situ tailored grain refinement of 316L stainless steel via site-specific titanium inoculation using laser directed energy deposition
Folco PeregoRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Christian Leinenbach
Solidification pathway induced microstructural differences in austenitic stainless steels produced by L-PBF.
Christos SofrasRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Efthymios Polatidis
Effect Of LPBF Process Parameters on Post-Heat Treatment Microstructures of Hastelloy X
Abdullah AydemirRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Christian Leinenbach
Balancing processability, high strength, and work hardenability in an AlMgScFe alloy processed by PBF-LB
Matteo TuraniRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Markus Bambach
Alloy design for additive manufacturing of a 6xxx aluminum alloy for ultra-high and medium strength applications
Mikel Rodriguez-ArbaizarRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Efrain Carreno-Morelli
Characterization of hybrid lattice structures fabricated by laser powder bed fusion and casting processes by Bragg edge neutron imaging
Sergio SoriaRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Markus Strobl
Interface engineering through TiC blending and interlayer approaches for defect mitigation in hybrid PBF-LB/M aluminium parts
T. M. NandakishorRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Eric Aimé Jägle
High strength Al recycling alloys for additive manufacturing
Joachim GussoneRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Clemens Simson
Thermo-mechano-metallurgical modeling of the wire arc additive manufacturing of titanium alloy parts
Valentin ClavierRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Optimizing process parameters for interfacial integrity in Cu–Ni bi-metallic additive manufacturing
José Manuel Crego LozaresRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Ingomar Kelbassa
Critical assessment of the defect tolerance of beta-metastable titanium alloys processed by additive manufacturing compared to cast alloys
Sarah DethierRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Amandine Duchaussoy
Magnetic Performance of Fe-Si-B Amorphous Ribbons: A Precursor Alloy for Additive Manufacturing of Soft Magnetic Components
Uma RajputRoom A – Auditorium
Wed 17:00 – 18:00
Poster presentation
Isabella Gallino
18:00 – 21:00 Poster Session + Apéro
Thu 2025-09-04
08:30 – 09:45 Keynote session 4
Computational Designed Printable Die Steel for GigaCasting
Florian HengsbachRoom A – Auditorium
I completed my thesis at Paderborn University at Prof. Schaper’s Materials Science group within the Department of Mechanical Engineering in 2023. Since 2020, I am working as a visiting student respectively, a visiting scientist in Prof. Olson’s materials design group at MIT. In my research, I employ a mechanistic systems approach that integrates processing, structure, property, and performance to design innovative multilevel-structured steels and alloys. Within the hierarchical designs, the CALPHAD method is combined with thermodynamic material models.
Thu 08:30 – 09:05
Machine learning + simul.
Additive Manufacturing of Refractory Metal Alloys Using Powder Bed Fusion – Laser Beam
Lukas KasererRoom A – Auditorium
Lukas Kaserer has been an assistant professor (tenure-track) and head of the Materials Science group at the Institute of Mechatronics at the University of Innsbruck, Austria since December 2024. He holds a Master’s degree in experimental physics from the University of Innsbruck and began researching materials for the Laser Powder Bed Fusion (LPBF) process at the start of his PhD in 2016. He completed his dissertation in 2021 with a thesis on the LPBF manufacturing of the refractory metal molybdenum and the development of new alloys adapted to the LPBF process. His current research focuses on alloy and process development for powder bed-based additive manufacturing of metallic materials. Taking an interdisciplinary approach, he and his group investigate refractory metals such as molybdenum and tungsten, as well as titanium and aluminum alloys and steels. A key focus is on understanding the interactions between powder characteristics, process parameters, and resulting material properties to develop tailored material solutions for advanced applications.
Thu 09:05 – 09:40
Alloy design
09:45 – 10:45 4.1 – Multi-materials III / Ti alloys II
Deconvoluting cracking mechanisms in fusion processing of steel-copper multi-materials
Andaç ÖzsoyRoom A – Auditorium
Thu 09:45 – 10:05
Multi-materials III
Co-processing metals with distinct compatibility levels through multi-material laser powder bed fusion
Caroline Pereira MartendalRoom A – Auditorium
Thu 10:05 – 10:25
Multi-materials III
Markus Bambach
Metallic metamaterials with tunable coefficient of thermal expansion produced via multi-material L-PBF
Isabel B. PrestesRoom A – Auditorium
Thu 10:25 – 10:45
Multi-materials III
Eric Aimé Jägle
powder2POWDER: a new opportunity for alloy development and powder upcycling
Bartosz KalickiRoom B – MC B1 303
Thu 09:45 – 10:05
Titanium alloys II
Altering microstructure and enhancing mechanical properties during additive manufacturing of Ti-6Al-4V via in-process laser heat treatments
K. Abdellah AbdesselamRoom B – MC B1 303
Thu 10:05 – 10:25
Titanium alloys II
Manas Upadhyay
Optimizing in-situ alloying in laser powder bed fusion: a study on Ti-W alloy feasibility and mechanical performances
Ammarueda IssariyapatRoom B – MC B1 303
Thu 10:25 – 10:45
Titanium alloys II
Katsuyoshi Kondoh
10:45 – 11:05 Coffee Break
11:05 – 12:25 4.2 – Therm. Simul. + Monitoring / Al alloys III
Multiscale numerical feedforward optimization of the Laser Powder Bed Fusion process
Lucas SchlengerRoom A – Auditorium
Thu 11:05 – 11:25
Thermal simulation + Monitoring
Roland Logé
Improving Microstructure Uniformity in Complex Inconel 718 and AlSi10Mg Geometries with PBF-LB/M Feedback Loop Control
Tobias NovotnyRoom A – Auditorium
Thu 11:25 – 11:45
Thermal simulation + Monitoring
Ulrich Kleinhans
macro-scale thermal modeling for optimization of preheating strategies during laser powder bed fusion of inconel 738 parts
Sylvain DucottetRoom A – Auditorium
Thu 11:45 – 12:05
Thermal simulation + Monitoring
Charles-André Gandin
Acoustic detection of phase transformation and crystallization for laser powder-bed fusion
Jamasp JhabvalaRoom A – Auditorium
Thu 12:05 – 12:25
Thermal simulation + Monitoring
Roland Logé
Process modelling & heat treatment simulations of Scalmalloy® fabricated by laser powder bed fusion (L-PBF)
Akash SonawaneRoom B – MC B1 303
Thu 11:05 – 11:25
Aluminium alloys III
Microstructure-mechanical property correlation in laser powder bed fusion produced Scalmalloy
Soudip BasuRoom B – MC B1 303
Thu 11:25 – 11:45
Aluminium alloys III
Christian Haase
Microstructure-property relationships in a new Al Alloy designed for Laser Powder Bed Fusion
Matthieu RicardRoom B – MC B1 303
Thu 11:45 – 12:05
Aluminium alloys III
Isabelle Mouton
Microstructure and micromechanical properties of microcellular AlSi10Mg produced by LPBF
Selma LeonardiRoom B – MC B1 303
Thu 12:05 – 12:25
Aluminium alloys III
M. Gabriella Tarantino
12:25 – 13:30 Lunch Break
Microcity Main Hall
13:30 – 15:10 4.3 – Synchrotron studies / Steel I
Microstructure and stress evolution in LPBF revealed by in situ X-ray and neutron Diffraction
Steven Van PetegemRoom A – Auditorium
Thu 13:30 – 13:50
Synchrotron studies
Multimodal Synchrotron Characterization of the Formation and Distribution of Retained Austenite in LPBF-Manufactured Ferritic-Martensitic Steel
Natan GarrivierRoom A – Auditorium
Thu 13:50 – 14:10
Synchrotron studies
An in-situ synchrotron study of the tensile deformation of LPBF-manufactured AlSi10Mg
Alessandro RoccoRoom A – Auditorium
Thu 14:10 – 14:30
Synchrotron studies
François Hild
Insight into 3D strain partitioning in high performance Al alloy designed for Additive Manufacturing thanks to synchrotron nano-tomography
Ilies BentameneRoom A – Auditorium
Thu 14:30 – 14:50
Synchrotron studies
Julie Villanova
Determining peak tensile residual stresses in laser powder bed fusion using diffraction-based analysis
Alexander EvansRoom A – Auditorium
Thu 14:50 – 15:10
Synchrotron studies
Itziar Serrano-Munoz
Microstructure engineering in duplex stainless steels via laser powder-bed fusion additive manufacturing
Nima HaghdadiRoom B – MC B1 303
Thu 13:30 – 13:50
Steel I
Sophie Primig
Degradation, reuse and recycling of 316L powder in PBF-LB
Eduard HryhaRoom B – MC B1 303
Thu 13:50 – 14:10
Steel I
Martensitic stainless steel with precipitation hardening and high mechanical strength for additive manufacturing
Tiphaine GiroudRoom B – MC B1 303
Thu 14:10 – 14:30
Steel I
Solange Vivès
Development of Steel Powder for High-Strength and Damage-Tolerant AM parts
Sugirtha SureshRoom B – MC B1 303
Thu 14:30 – 14:50
Steel I
Olena Volkova
On the microstructural stability of metastable CrMnNi steels processed by laser-based additive manufacturing techniques
Julia RichterRoom B – MC B1 303
Thu 14:50 – 15:10
Steel I
Thomas Niendorf
15:10 – 15:30 Coffee Break
15:30 – 17:10 4.4 – Alloy design / Steel II
A 3D analysis of the microstructural interfaces in “meta polycrystals”
Matteo SeitaRoom A – Auditorium
Thu 15:30 – 15:50
Alloy design
An Al-Zn alloy with outstanding processability by laser powder bed fusion
Marcos Rodríguez SánchezRoom A – Auditorium
Thu 15:50 – 16:10
Alloy design
Exploiting additive manufacturing-induced cellular structures for the design of precipitation-strengthened alloys
Ahmet TurnaliRoom A – Auditorium
Thu 16:10 – 16:30
Alloy design
Christian Haase
Accelerated Alloy Development for AM by Mimicking AM Process Conditions
Julius WeidingerRoom A – Auditorium
Thu 16:30 – 16:50
Alloy design
Carolin Körner
High-Throughput Design and Additive Manufacturing of Refractory MPEAs
Julia ChmielewskaRoom A – Auditorium
Thu 16:50 – 17:10
Alloy design
Christian Leinenbach
Study of the Wire Laser Additive Manufacturing (WLAM) Process Applied to a Low-Alloy Steel
Rémi ThuilletRoom B – MC B1 303
Thu 15:30 – 15:50
Steel II
Nicolas Ranc
A novel medium-carbon steel adapted to laser powder bed fusion: microstructure, mechanical and wear properties
Zhengyi JinRoom B – MC B1 303
Thu 15:50 – 16:10
Steel II
Julia Hufenbach
control of solid-state phase transformations during the wire arc additive manufacturing process to reduce residual stress and deformation in deposits
Pauline ArnoulinRoom B – MC B1 303
Thu 16:10 – 16:30
Steel II
bruno Courant
Microstructural homogeneity and robustness of novel low alloy steel powders processed via L-PBF
Rosalia RementeriaRoom B – MC B1 303
Thu 16:30 – 16:50
Steel II
Michel Soler
Development of novel process parameter for laser-powder bed fusion based additive manufacturing of crack prone AISI M2 high speed steel
Tousif AnwerRoom B – MC B1 303
Thu 16:50 – 17:10
Steel II
Murugaiyan Amirthalingam
17:10 – 19:00 Break
Fri 2025-09-05
08:30 – 09:45 Keynote session 5
Designing immiscible metallic composites using additive manufacturing
Marie-Agathe CharpagneRoom A – Auditorium
Marie A. Charpagne is an assistant professor in the Materials Science and Engineering Department at the University of Illinois at Urbana-Champaign. She graduated with a PhD in Materials Science from Mines ParisTech in 2017, focusing on thermo-mechanical processing. Before joining UIUC in Fall 2021, she was a postdoctoral researcher at the University of California in Santa Barbara, where she developed new techniques in correlative and 3D electron microscopy. Her research now leverages core concepts in physical metallurgy, rapid solidification and micro-mechanics, to design new alloys that adapt dynamically to extreme environments. She received her NSF CAREER award as well as the ACS New investigator award in 2023, the TMS Early career faculty fellow award in 2025, and is the author of over 45 peer-reviewed articles.
Fri 08:30 – 09:05
Multi-materials
Unlocking Innovation in Materials and Manufacturing via Open-Source AM
Venkata Karthik NadimpalliRoom A – Auditorium
Dr. Venkata Karthik Nadimpalli is an expert in the field of additive manufacturing. He earned his B.Tech in Metallurgical and Materials Engineering from IIT Madras in 2011, followed by an MSc and PhD in Industrial Engineering from the University of Louisville, Kentucky, in 2017. Currently, Dr. Nadimpalli serves as a Senior Researcher and Group Leader for Additive Manufacturing (AM) materials and processes at DTU Construct in Denmark. His research primarily focuses on materials development using open-architecture AM systems including vat photopolymerization, binder jetting and laser-based powder bed fusion. Dr. Nadimpalli's record of publications and patents, including over 50 journal articles and conference papers, has earned over 1,500 citations. In addition to his research, Dr. Nadimpalli has supervised multiple postdoctoral researchers, PhD candidates, and MSc students. His teaching contributions include developing an ongoing 3-week summer school titled 'Experimental methods in 3D printing', which is a technological specialization course for MSc and PhD students. He is the winner of a few prestigious awards, including the Otto Mønstead Foundation MADE prize, highlighting his position as a leading manufacturing researcher in Denmark.
Fri 09:05 – 09:40
Open-Source AM
09:45 – 10:45 5.1 – ML + Simul. / BMGs
Simulation-driven microstructure engineering: linking process, structure, and performance
Aleksandr ZinovievRoom A – Auditorium
Fri 09:45 – 10:05
Machine learning + Simulation
Olga Zinovieva
Bayesian Active Learning of Microstructure Transition in Rapid Solidification Using Phase-Field Simulations
Brent VelaRoom A – Auditorium
Fri 10:05 – 10:25
Machine learning + Simulation
Damien Tourret
Machine learning approach for the development of new β-metastable Ti alloys best-suited for additive manufacturing
Sarah DethierRoom A – Auditorium
Fri 10:25 – 10:45
Machine learning + Simulation
Additive manufacturing: a tool for engineering microstructures and mechanical behavior
Efthymios PolatidisRoom A – Auditorium
Fri 10:45 – 11:05
Machine learning + Simulation
Efthymios Polatidis
11:05 – 11:25 Coffee Break
11:25 – 12:45 5.2 – Cu-Ni alloys / SMAs
Effect of high oxygen content on unalloyed copper produced by electron beam powder bed fusion
Prithwish TarafderRoom A – Auditorium
Fri 11:25 – 11:45
Copper-nickel alloys
Johan Moverare
Improving fatigue resistance of reused AM Inconel 718 using carbide additives and HIP
Konrad GruberRoom A – Auditorium
Fri 12:05 – 12:25
Copper-nickel alloys
Markus Strobl
Microstructural evolution in Electron Beam Powder Bed Fusion of a nickel-based ODS superalloy
Silja-Katharina RittinghausRoom A – Auditorium
Fri 12:25 – 12:45
Copper-nickel alloys
Bilal Gökce
Microstructure control in Laser Additive Manufacturing revealed by X-rays
Yunhui ChenRoom A – Auditorium
Fri 12:45 – 13:05
Copper-nickel alloys
Prospects and challenges in additive manufacturing of shape memory alloys
Thomas NiendorfRoom B – MC B1 303
Fri 11:25 – 11:45
Shape-memory alloys
Elemental segregation-induced variation of phase stability in additively manufactured steels
Kim DohyungRoom B – MC B1 303
Fri 11:45 – 12:05
Shape-memory alloys
Wookjin Lee
Effect of process parameters on microstructure and shape memory properties of Fe-17Mn-5Si-4Ni-1VN alloys fabricated by L-DED
Jongwook JungRoom B – MC B1 303
Fri 12:05 – 12:25
Shape-memory alloys
Wookjin Lee
On the Effect of Process Parameters on Manganese Content and Shape Memory Behavior of LPBF-Fabricated Fe-Based Alloys
Mohammad ShojaatiRoom B – MC B1 303
Fri 12:25 – 12:45
Shape-memory alloys
Mui Ling Sharon Nai
Microstructural grading for tuning of the functional behavior of LPBF printed NiTi-based SMAs
Eslam Salaheldin AbdelhadyRoom B – MC B1 303
Fri 12:45 – 13:05
Shape-memory alloys
Ian Gibson
13:05 – 13:10 Closing remarks
Room A – Auditorium
13:10 – 14:10 Cold lunch
Microcity Main Hall
Join the alloys for additive manufacturing symposium
For any questions please contact us!